Aluminium Rear
Posted on | April 29, 2008 | Comments Off
Aluminium Rear

Will you help me determine if this is a good bike?
Ir's a dual suspension 21 speed Huffy Pulsar bike
Alloy brushed rims
Front & rear suspension
Aluminium dual suspension
3 piece crank
Front disc brake
Shimano EZ-fire 21 speed shifters
I am 15 and want to ride it to school and work + other close by facilities, i.e shops etc but mainly the first two which are both over 3 KM away with a lot of hard uphill riding involved.
Should I get it or not?
Even though Huffy is owned by TREK. I would suggest not buying it and purchasing a front suspenion bike. It will be lighter than the huffy and easier to get up the hills not as you wont be carrying extra weight of the inexpensive suspension and inexpensive parts that will wear out quicker than the parts on a entry level front suspension bike. Look for a Specialized, Trek, or any brand that is carried in a Bicycle Retailer, Try not to buy a bike from a big chain store like target or wal mart. The value isnt in the bike, The bikes are in those stores to meet a price point not for value reasons. please look into buying your next bike at a shop, You will be happier in the long run, since the bike will be fit to you you will enjoy riding it more and longer than the chain store bike, wheres its closer to two or three sizes fit all.
Harley Davidson Bobber, Cafe Racer, Sportster
![]() |
No items matching your keywords were found.
![]() |
![]() |
ALUMINIUM FRONT REAR SHOCK TOWER BRACE SUPPORT BLACK FOR 1/5 HPI KM BAJA RC CARS | ![]() |
![]() |
US $83.00 | 15h 51m |
![]() |
3RACING FOR KYOSHO MINI Z AWD Aluminium Rear Bulkhead (#AWD-30) | ![]() |
![]() |
US $12.80 | 17d 12h 12m |
![]() |
3 Racing Aluminium Rear Hub For Team Losi 8ight | ![]() |
![]() |
US $17.70 | 23d 22h 7m |
![]() |
Tamiya TT01E aluminium Front or Rear Gear box Cover | ![]() |
![]() |
US $28.88 | 23d 10h 15m |
![]() |
3Racing for TAMIYA F103GT Aluminium Rear Damper (#F103GT-07/LB) | ![]() |
![]() |
US $7.69 | 20d 21h 13m |
![]() |
3RACING FOR KYOSHO MINI Z AWD Aluminium Rear Bumper w/Exhaust Pipe (#AWD-27) | ![]() |
![]() |
US $8.90 | 9d 15h 40m |
![]() |
Kyosho Ultima SC / RB aluminium Rear Arm mount (R) | ![]() |
![]() |
US $8.88 | 23h 50m |
![]() |
102012 ALLOY UPGRADE ALUMINIUM REAR HUB CARRIER 02130 | ![]() |
![]() |
US $27.98 | 29d 9h 27m |
![]() |
Mini LST Front or Rear Silver Aluminium Body Post by GPM MLT201F/R | ![]() |
![]() |
US $4.99 | 17d 4h 45m |
![]() |
NEW Silver Aluminium Rear Lower Arm BJ056:HPI Baja 5B | ![]() |
![]() |
US $41.99 | 29d 8h 20m |
![]() |
3Racing Aluminium Rear Hub Carrier For Tamiya DT-02 (#DT02-02/LB) | ![]() |
![]() |
US $12.82 | 27d 20h 2m |
![]() |
Traxxas 5558 Nitro Jato Front Rear Tie Bars Aluminium Blue | ![]() |
![]() |
US $5.00 | 26d 2h 46m |
![]() |
Trinity Aluminium Rear Body Mount #tri35018 | ![]() |
![]() |
US $26.99 | 26d 26m |
![]() |
RC10 GT Blue Aluminium Rear Gearbox by GPM RGT013 | ![]() |
![]() |
US $40.49 | 25d 2h 12m |
![]() |
3Racing (#FGX-314/PK) Aluminium Motor Mount & Rear Bulkhead For Sakura FGX | ![]() |
![]() |
US $23.63 | 24d 15h 36m |
![]() |
XRAY T2 - Aluminium Rear Lower Suspension Adjustable Bulkhead, # 303018 (One) | ![]() |
![]() |
US $10.00 | 22d 23h 23m |
![]() |
3Racing Aluminium Rear Suspension Brace Tamiya DF03RA | ![]() |
![]() |
US $11.50 | 22d 21h 35m |
![]() |
3Racing Aluminium Rear Hub for Tamiya TB-02 (#TB02-12/LB) | ![]() |
![]() |
US $12.49 | 21d 22h 33m |
![]() |
Team Durango Suspension Holder Aluminium: Rear 330010 | ![]() |
![]() |
US $22.40 | 21d 35m |
![]() |
3Racing Aluminium Rear Brace for Kyosho Lazer ZX-5 (#ZX5-15/SI) | ![]() |
![]() |
US $11.50 | 14d 6h 38m |
![]() |
Tamiya TT01 / TT01E aluminium rear lower arm (2) | ![]() |
![]() |
US $13.88 | 19d 1h 48m |
![]() |
3Racing Tamiya M03 M04 Aluminium Rear Axles #17/LB | ![]() |
![]() |
US $2.50 | 5d 21h 18m |
![]() |
3Racing Aluminium Rear Hub Carrier For Tamiya DT02 | ![]() |
![]() |
US $12.80 | 3d 21h 10m |
![]() |
REDCAT 06014 ALUMINIUM REAR SHOCK TOWER - USA SELLER | ![]() |
![]() |
US $4.48 | 16d 2h 31m |
![]() |
Tamiya (#53800) (TT01, TGS) Aluminium Toe-in Rear | ![]() |
![]() |
US $36.45 | 15d 14h 25m |
![]() |
02130 102012 ALUMINIUM REAR AXLE UPGRADE HSP WINDHOBBY | ![]() |
![]() |
US $29.90 | 7d 8h 47m |
![]() |
NEW Silver Aluminium Rear Upper Arm BJ057: HPI Baja 5B | ![]() |
![]() |
US $33.99 | 12d 8h 5m |
![]() |
3 Racing Aluminium Rear Shock Tower Mini Inferno ST | ![]() |
![]() |
US $7.60 | 10d 23h 13m |
![]() |
Traxxas Tra 6823 Slash 4x4 Front and Rear Aluminium Bulkhead Tie Bars | ![]() |
![]() |
US $7.00 | 10d 4h 12m |
![]() |
Tamiya M05 Aluminium Rear & Front Upper Arm Set | ![]() |
![]() |
US $24.99 | 8d 14h 3m |
| Powered by phpBay Pro |
| Account limit of 2140 requests per hour exceeded. |
advice on an american jon boat 1032 (topper)?
hi, i have an american jon boat,its a 1032, topper/tracker. aluminium rivited boat.it has a flat botom, and has 3 seats in it.
it was new in feb 2008, and baught as used by me.
tried it on the lochs, and kinda scared the poop out ourselfes. there was waves coming over the front, and on occassion, over the rear.
these things , while frightening, were not the problem, i need to know if these boats are un sinkable, and if there is bauyancy under the seats, so if it did swamp, or flip over the boat would still float.
if not, has anyone added bauyency, mabye drill a small hole , and fill it with expanding foam? i dont really know. some lochs are about 1/2 a mile deep, if it sinks its gone,lol.
do you have one, or had one in the past? please help.
from what i undestand those lochs over there can really kick up,,,,and there are very,very big. I heard somewhere that submarines tie up in them.
A jon boat is not made for the ocean or ocean like waves. I live along the eastern seacoast and use a 16 foot fiberglass '' skiff"" which is really a flat bottomed jon boat. It is filled with foam and you can cut it in half and both halfs will float like a cork. But i stay close to shore and in the bays and inlets. A 2 foot wave beats the hell out of me going at 15 or 20 mph. So keep the life preserver strapped on and stay away from the bad weather and high winds.
Another thing is the outboard motor. When its running I have a lanyard attached to a motor cutout switch and the other half on my wrist. If i get flipped out the lanyard will shut off the motor.
Tags: aluminium > aluminium rear > aluminium rear door > aluminium rear paddock stand > aluminium rear wing > aluminium-running-board > engine > rear lower > side
































