Pins Spacers
Posted on | February 22, 2008 | Comments Off
Pins Spacers

Do you take the maxigrip scope rail off to allow the compression cylinder to make contact with the trigg. sear
There must be plenty ofBSA Goldstar owners out there who have had the piston out to renew the piston seal that can answer my question. I have to move the compression cylinder to make contact with the trigger sear and then feed the piston into the cylinder and past the sear while holding the trigger on fire and pushing the trigger locking plate forward towards the muzzle, this resets the trigger,and underlever overtravel to index the magazine.The problem is the compression cylinder won't come down any further than the maxigrip scope rail lugs,it's about 2 inches from the sear. The compr. cyl. won't go over the top of the lugs, the scope rail is held by a pin, I tried to lever the rail up but it won't budge,I tried to knock the pin out but it wouldn't move, I e-mailed BSA friday morning 2.3.07, waiting for reply.This is the first air rifle I've owned so I don't know much about them, just learning. I took the piston out (bad mistake) to get the 4 spacers and washers out to fit a gasram
Why don't you try to find a Competitive Airgunners Forum, and ask one of those guys. Other than sending BSA a flurry of e-mails until they finally answer you, this might be your best bet.
There are probably a lot of knowlegable guys on such Forums on a Saturday night, why don't you give that a try?
I can tell you this, don't force the parts.
Some airguns require a special tool to compress the cyl.
If you decide to try to drive out the pin, WHICH MAY NOT BE NECESSARY, do so from the left side of the reciever.
I'd try forums first, then e-mail BSA many more times.
Set your Pin Spacer
![]() |
No items matching your keywords were found.
![]() |
![]() |
Traxxas 3908 Brushless E-maxx A-arm Hinge Pins w/ Spacers 16.8 Emaxx Pin Set | ![]() |
![]() |
US $3.99 | 4d 2h 2m |
![]() |
OFNA Hyper 7 TQ Buggy Suspension A-Arm Hinge Pins // Arms Pin w/ Clips & Spacers | ![]() |
![]() |
US $5.99 | 14d 21h 56m |
![]() |
NEW T-MAXX 3.3 4908 ARMS HINGE PINS W/ SPACERS E 2.5 | ![]() |
0 Bid | US $.99 | 4h 41m |
![]() |
Traxxas 3.3 Jato Front & Rear A-arm Hinge Pins Spacers & Mounts Pin Mount | ![]() |
![]() |
US $5.99 | 16d 8h 11m |
![]() |
NEW 1/10 Traxxas 5607 Summit Rear Bulkhead Rockers Bearings Hinge Pins & Spacers | ![]() |
![]() |
US $3.99 | 13d 4h 48m |
![]() |
NEW T-MAXX 3.3 4908 ARMS HINGE PINS W/ SPACERS E 2.5 | ![]() |
0 Bid | US $.99 | 2d 4h 33m |
![]() |
Losi Rear Axle Drive Pins & Spacers: Slider, HRL LOSB3549 | ![]() |
![]() |
US $4.19 | 22d 23h 43m |
![]() |
RC18T Stub Axle Pins & Spacers ASC21096 | ![]() |
![]() |
US $2.25 | 8d 11h 5m |
![]() |
Associated 21096 Stub Axle Pins (4) & Spacers (4): SC18 New | ![]() |
![]() |
US $2.68 | 15d 9h 7m |
![]() |
Associated RC18T Axle Pin & Spacers 21096 BINBB5 | ![]() |
![]() |
US $2.05 | 28d 11h 20m |
![]() |
LOSB3549 Losi Rear Axle Drive Pins & Spacers: HRL | ![]() |
![]() |
US $4.15 | 25d 3h 45m |
![]() |
NEW TRAXXAS E-MAXX BRUSHLESS ARMS HINGE PINS SPACERS | ![]() |
![]() |
US $3.95 | 29d 9h |
![]() |
RC18T RC18B RC18R, Stub Axle Pins & Spacers 21096 | ![]() |
![]() |
US $2.80 | 22d 13h 27m |
![]() |
NEW TRAXXAS REVO 3.3/2.5R SUSPENSION PINS & SPACERS | ![]() |
![]() |
US $5.95 | 29d 2h 10m |
![]() |
NEW TRAXXAS SLAYER COMPLETE SET HINGE PINS W/SPACERS | ![]() |
![]() |
US $4.95 | 29d 55m |
![]() |
Traxxas 3905 E-Maxx Complete hinge pin set W/spacers | ![]() |
![]() |
US $7.00 | 29d 6m |
![]() |
NEWTRAXXAS E -REVO 5605 SUSPENSION PINS & SPACERS | ![]() |
![]() |
US $.99 | 25d 22h 51m |
![]() |
Team Associated AE 21096 Stub Axle Pins & Spacers RC18T | ![]() |
![]() |
US $2.18 | 28d 6h 23m |
![]() |
New Traxxas 2.5 T-Maxx Complete hinge pin set W/spacers | ![]() |
![]() |
US $6.00 | 25d 20h 2m |
![]() |
Traxxas Summit hinge pin set with spacers | ![]() |
![]() |
US $5.95 | 25d 9h 36m |
![]() |
HPI RACING WHEELIE KING 14MM & 12MM PLASTIC WHEEL HUB HEXES PINS LUG NUTS SPACER | ![]() |
![]() |
US $6.99 | 25d 2h 38m |
![]() |
Traxxas Revo 3.3 Complete hinge pin set W/spacers | ![]() |
![]() |
US $4.00 | 18d 21h 42m |
![]() |
RC18T2, RC18B2, SC18, Stub Axle Pins & Spacers 21096 | ![]() |
![]() |
US $2.80 | 22d 13h 27m |
![]() |
NEW REAR AXLE SPACER AND PIN LOSA3015 | ![]() |
![]() |
US $6.99 | 22d 11h 5m |
![]() |
Associated RC 18T Stub Axle Pins Spacers 21096 RC Parts | ![]() |
![]() |
US $1.99 | 21d 6h 34m |
![]() |
NEW T-MAXX 3.3 4908 ARMS HINGE PINS W/ SPACERS E 2.5 | ![]() |
![]() |
US $.99 | 20d 10h 43m |
![]() |
NEW E -REVO BRUSHLESS 5608 SUSPENSION PINS & SPACERS | ![]() |
![]() |
US $4.95 | 20d 2h 31m |
![]() |
SPORTWERKS DRIVE PINS/AXLE SPACERS: REAC #SWK7029 NIB | ![]() |
![]() |
US $5.40 | 20d 2h 19m |
![]() |
Traxxas 5608 E-Revo Complete hinge pin set W/spacers | ![]() |
![]() |
US $6.00 | 19d 3h 53m |
![]() |
NEW TRAXXAS SLAYER 5907 SET HINGE PINS W/SPACERS E REVO | ![]() |
![]() |
US $4.95 | 18d 9h 25m |
| Powered by phpBay Pro |
| Account limit of 2112 requests per hour exceeded. |
































